Home | About Tri Arc | Contact Us  

Crossover Platforms

A crossover platform allows a person to safely walk over an obstacle or hazardous area instead of having to go around or through it. Crossovers can increase productivity as well as safety by improving access to hard-to-reach areas. You can select the parts needed to create your own specially configured U-Design crossover by following the steps below.


  • • 1,000-lb. load rating
    • 1” x 2” rectangular tubing frame
    • 24” wide steps on all sections
    • 42” guardrail height above platforms
    Download the Crossover Spec Sheet Download the Crossover Spec Sheet Configurator - Build your custom design • Hardware included for assembly
    • Foot plates for bolting to the floor
    • Meets OSHA and ANSI standards
    • Yellow powder-coated finish
    • Minimal assembly required


Create the Perfect Crossover For Your Application in 3 Easy Steps,
Thousands of Possible Configurations

Step 1 Select the ladders by Height and Incline udesign crossover platformsChoose the right ladders by determining your required height clearance, then select the ladder that has a greater clearance height from the table at right. U-Design also offers ladders in 3 different inclines to accommodate different available floor spaces.

Select the Bridge Span PlatformsBridge spansThe 20” and 30” bridge spans can be repeated or combined to create spans up to 90” long. Choose the combination of spans to exceed your required clearance width.

Select the  Configuration udesign configurationsTurn platforms allow you to create various configurations other than a straight crossover. These configurations and the number of turn platforms required are shown to the right.

Start designing your custom layout with the configuration program

New UDesign Configurator